Mira Orbis Betriebsanweisung PDF herunterladen (Seite 27)

Clock Battery Replacement Procedure

Warning! There are no user serviceable components beneath the cover of the

appliance. Only a competent tradesperson should remove the front cover!

Read the section “Important Safety Information” rst.

1. Isolate the electrical supply before commencing this procedure. The electricity

must be turned off at the mains and the appropriate circuit fuse removed, if

applicable.

2. Mains connections are exposed when the cover is removed.

Remove the three screws. Carefully

remove the cover, making sure that you

do not strain the multi-connector.

Carefully remove the multi-connector

from the socket on the control PCB in the

case. Remove the service tunnel.

Carefully remove the battery from the

housing.

When the battery has reached the

end of its serviceable life, make sure

the battery is disposed of in a safe

manner, in accordance with current

local authority recycling, or waste

disposal policy.

Ret a new battery.

(Battery type BR 2032 or CR2032)

Connect the multi-connector to the

socket on the PCB.

Ret the Cover. Make sure that it ts

correctly. Do not overtighten the three

cover retaining screws.

Restore the electrical supply.

Reset the clock, refer to the ‘Clock

Setting’ procedure.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32

Keine Kommentare

Mira Orbis Betriebsanweisung Seite 27