Mira Discovery Betriebsanweisung PDF herunterladen (Seite 25)

3.8 Fit the hot and cold supply pipes and

tighten the compression nuts.

Falling Supplies: For falling supplies

loosen the grubscrew on each Elbow

using the 2.5 mm Hexagon Key (supplied).

Remove the Elbows and install on

opposite sides. Secure the Elbows with

the Grubscrews.

Caution! Do not overtighten.

Note! Make sure that the Filter Plugs are

positioned to the front (i.e. Hexagonal Key

facing forward).

Caution! Make sure that the olives

are fitted and all pipework is flushed

through before connecting to the Shower

Control.

3.9 Fit the outlet pipework, leaving enough

pipe through the wall to temporarily cap

off.

3.10 Turn on the water supplies and check for

leaks.

3.11 Fit the Shower Fittings, refer to your

Fittings Installation and User Guide for

instructions.

3.12 Fit the Concealing Plate and Control

Assembly, refer to section: ‘Control

Assembly’.

Hot Supply

Cold Supply

Outlet Pipe to

Fittings

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 39 40

Keine Kommentare

Mira Discovery Betriebsanweisung Seite 25