Mira Discovery Betriebsanweisung PDF herunterladen (Seite 10)

1. Mira Discovery ev - Exposed Variable Shower Fittings

Solid, dry-lined, stud partition, shower cubicle or laminated panel walls

Read the section “Installation Requirements” first.

The slide bar should be fixed to the wall to one side of the product and at a convenient

height for all the family. It should be positioned so that it discharges down the centre

line of the bath, or across the opening of a shower cubicle and should be directed away

from the shower control.

The right angled connector assembly (RAC) for use with built-in shower controls, should

be positioned above and offset from the top outlet of the shower control. This will

prevent the flexible hose from obstructing the temperature and flow controls used to

operate the shower. The pipework between the shower control and the RAC fitting is

not supplied as part of the product.

Installation

1.1. Decide on a suitable location for

the slide bar avoiding buried

cables and pipes. The position

of the shower control and the

shower fittings must provide a

minimum gap of 25 mm between

the spill-over level and the

handset. This is to prevent back

siphonage. Alternatively an

outlet double check valve can

be fitted.

1.2. Screw the hose onto the handset.

Make sure that the hose washer

is fitted.

Section

Hose

Hose Washer

Handset

Spill-over Level

25mm Min

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Keine Kommentare

Mira Discovery Betriebsanweisung Seite 10