Mira Play Betriebsanweisung PDF herunterladen (Seite 4)

IMPORTANT SAFETY INFORMATION

Installation must be carried out in accordance with these instructions, and must be

conducted by designated, qualied and competent personnel.

1. Warning!

This shower can deliver scalding temperatures if not operated, installed

or maintained in accordance with the instructions, warnings and cautions

contained in this guide and on or inside the appliance.

If you require a thermostatic shower Mira produce a range which also limit the

maximum temperature, for more information our contact details can be found

on the back cover of this guide.

1.1. Products manufactured by us are safe and risk-free, provided that they are

installed, used and maintained in good working order, in accordance with our

instructions and recommendations.

1.2. Isolate the electrical and water supplies before commencing installation. The

electricity must be turned off at the mains and the appropriate circuit fuse

removed, if applicable.

1.3. Mains connections are exposed when the cover is removed.

1.4. Refer to the wiring diagram before making any electrical connections (refer to

the wiring diagram at the back of this guide).

1.5. Make sure that any pipework that could become frozen is properly insulated.

1.6. Having completed the installation, make sure that the user is familiar with the

operation of the appliance.

1.7. Make sure that this guide is left with the user.

1.8. DO NOT commission this appliance if water leaks from the unit or the heater

tank pressure relief valve.

1.9. DO NOT t any form of outlet control (e.g. Trigger handset) as the outlet acts

as a vent for the tank body. Only Mira recommended outlet ttings should be

used.

1.10. Make sure all electrical connections are tight, to prevent overheating.

1.11. Warning! DO NOT operate this appliance if it is frozen. Allow the appliance to

thaw before using. The shower unit must not be tted where it may be exposed

to freezing conditions.

1.12. This product is not suitable for areas with high humidity (i.e steam rooms).

Please consult your installer.

1.13. THIS APPLIANCE MUST BE EARTHED. MAKE SURE SUPPLEMENTARY

BONDING COMPLIES WITH THE “REQUIREMENTS FOR ELECTRICAL

INSTALLATIONS”.

The installation must be in accordance with the current edition of ’The Plugs

and Sockets etc. (Safety) Regulations’ in force at the time of installation, this

Mira Play is intended to be permanently connected to the xed electrical wiring

of the mains system.

1 2 3 4 5 6 7 8 9 ... 35 36

Keine Kommentare

Mira Play Betriebsanweisung Seite 4